Hobart Handler 190 MIG Welder

Features

• 7 voltage settings, with infinite wire feed speed control: Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
• Accepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gun: Allows you to weld aluminum with enhanced feed ability and reduction of "bird-nesting".
• Integrated spool gun control circuitry is standard: Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun
• Door Chart with initial settings: You are able to quickly reference initial settings for different Wire, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
• Built-in contactor: Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe
• Industrial cast aluminum wire drive system: Durable wire feed provides you professional performance
• Convenient polarity changeover: Easier and quicker for you to change polarity between solid or tubular wire
• Quick Select drive roll: Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire
• Short circuit protection: Protects unit against current overload.
• Self- resetting thermal overload protection: Protects power transformer from thermal overload to provide you maximum reliability
• Self-resetting motor protection: Protects wire feed system from overload, you won't need to change or reset the circuit breaker button

Specifications

• Country of Origin: United States
• Length: 19.5
• Width: 10.625
• Height: 12.375
• Weight: 68
• Max Open Circuit Voltage: 31 VDC
• Input Phase: Single Phase
• Amperage Min: 25 A
• Amperage Max: 190 A
• Amperage Range: 25 A - 190 A
• Min Thickness - ga - Mild Steel: 24 ga
• Min Wire Feed Speed - IPM: 40 IPM
• Max Wire Feed Speed - IPM: 740 IPM
• Input Voltage: 220V | 230V | 240V
• Max Thickness - in - Mild Steel: 0.3125 in
• Current Type: DC
• Weldable Metals: Aluminum | Stainless Steel | Steel
• Input Hz: 60 Hz
• Material Thickness Display: Mild Steel 24 ga. (0.5 mm) - 5/16 in (7.9 mm)
• Wire Diameter Display: Stainless 0.024 in - 0.035 in | Stainless 0.6 mm. - 0.9 mm. | Solid Steel 0.6 mm. - 0.9 mm. | Solid Steel 0.024 in - 0.035 in | Flux Cored 0.03 in - 0.045 in | Flux Cored 0.8 mm. - 1.2 mm.
• Wire Feed Speed Display: 40 IPM - 740 IPM

Downloads

Spec Sheet