Miller Electric Invision 352 Mpa MIG Welder

Features

• Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
• As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments.
• Provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
• Fine tunes puddle fluidity in Pulsed MIG (GMAW-P) welding.
• Dedicated XR™-Pistol Plus and XR-Aluma-Pro™ Plus guns work with the 74 MPa Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.
• Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
• Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
• Allows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.

Specifications

• Country of Origin: United States
• Length: 24
• Width: 12.5
• Height: 17
• Weight: 80
• Rated Output: 10-38 V,5-425 A
• Weld Output: CC / CV
• Amperage Range: 5 A - 425 A
• Input Phase - To Be Deleted: 1and3phase
• Input Voltage: 208 V|220/230/240 V|380/400/440 V|460/480 V|575 V
• Current Type: DC
• Weldable Metals: Aluminum|Specialty Metals|Stainless Steel|Steel
• Input Hz: 50/60 Hz

Downloads

Spec Sheet
CSA Cert