Hypertherm Powermax45 SYNC w/ 75° Hand Torch 20 ft 088560

Specifications

• Cut Capacity: 16 mm (5/8") @ 500 mm/min (20 ipm)
• Severance (hand cutting): 29 mm (1-1/8") @ 125 mm/min (5 ipm)
• Pierce Capacity: 12 mm (1/2")
• Typical Gouge: 3.4 kg (7.5 lbs.) per hour, 3.2 mm D x 6.8 mm W (0.12″ D x 0.26″ W)
• Input Voltages:
  • CSA: 200–240 V, 1-PH, 50/60 Hz | 480 V, 3-PH, 50/60 Hz
  • CE: 230 V, 1-PH, 50/60 Hz | 400 V, 3-PH, 50/60 Hz
• Kilowatt Output: 6.9 kW
• Input Current:
  • CSA: 200-240 V, 1-PH, 39/32 A @ 6.5 kW
  • CE: 230 V, 1-PH, 33 A | 400 V, 3-PH, 10 A
• Output Current: 9–45 A
• Rated Output Voltage: 155 VDC
• Duty Cycle @ 104° F:
  • CSA: 50% @ 45 A, 200–240 V, 1-PH | 60% @ 41 A, 200–240 V, 1-PH | 100% @ 32 A, 200–240 V, 1-PH
  • CE: 50% @ 45 A, 230 V, 1-PH | 60% @ 41 A, 230 V, 1-PH | 100% @ 32 A, 230 V, 1-PH
• Open Circuit Voltage (OCV):
  • CSA: 275 VDC 200-240 V | 275 VDC 480 V
  • CE: 265 VDC 400 V
• Dimensions (with handles): 442 mm D x 173 mm W x 357 mm H (17.4" D x 6.8" W x 14.1" H)
• Weight with Torch:
  • CSA: 14 kg (31 lbs.)
  • CE: 15 kg (33 lbs.)
• Gas Supply:
  • Cutting: air (clean, dry, oil-free), nitrogen, F5
  • Gouging: air (clean, dry, oil-free), nitrogen, F5
  • Marking: air (clean, dry, oil-free)
• Recommended Gas Inlet Flow Rate/Pressure: 188 I/min @ 5.9 bar (400 scfh @ 85 psi)
• Input Power Cable Length: 3 m (10')
• Power Supply Type: Inverter – IGBT
• Engine Drive Requirement: 12.5 kVA (10 kW) for full 45 A output
• Electrical Efficiency: 90%
• Certifications:
  • CSA: Certified for use in the Americas and Asia, except China
  • CE: For use in Europe, Australia, New Zealand, Belarus, Kazakhstan, Serbia, Ukraine
  • RCM, UKCA – Great Britain
• Warranty: 3-year on power supplies, 1-year on torches